current position：
Home
>
Product Center > CPVC resin
CPVC is a thermoplastic produced by chlorination of polyvinyl chloride (PVC) resin, which is significantly more flexible and can withstand higher temperature than PVC.
CONTACT US PDF FORMATWhat is SurplaTM CPVC resin
CPVC is a thermoplastic produced by chlorination of polyvinyl chloride (PVC) resin, which is significantly more flexible and can withstand higher temperature than PVC. It is a high heat and corrosion resistant material, and it has become an important engineering thermoplastic due to its relatively low cost, high heat distortion temperature, chemical resistance, outstanding mechanical, and dielectric, flame and smoke resistance properties. CPVC was first commercialized by Noveon in the early 1960s and has since proven its value in a variety of industrial applications in which a high use temperature and excellent resistance to chemical are desirable. Uses include hot and cold water delivery pipes and industrial liquid handling. Besides pipe and fittings, many other industrial fluid-handling product are available in CPVC including pumps, valves , strainers, tower packing, and duct, as well as sheet for fabrication into tanks ,duct, and tank lining.
Features of SurplaTM CPVC resin
Superior Heat Resistance
Good Chemical Resistance and Corrosion Resistance
Flammability
Superior Electric Insulation Properties
Excellent Treatment / Secondary Processing Properties
Table 1 Typical physical property of CPVC resin
Item | Test standard | IJ-550 | ET-750 | ET-800 | ET-850 |
Physical property | |||||
External Appearance | -- | White Power | White Power | White Power | White Power |
Bulk Density ,g/cm3 | -- | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 | 0.5 - 0.7 |
Sieving rate,30 mesh, % ≥ | GB/T2916 | 99 | 99 | 99 | 99 |
Chlorine Content,% | GB/T7139 | 65 - 67 | 64 - 66 | 66 - 68 | 67- 69 |
volatiles, % ≤ | GB/T2914 | 0.3 | 0.3 | 0.3 | 0.3 |
Thermal decomposition temperature,℃, ≥ | GH-002 | 120 | 120 | 120 | 120 |
Thermal property | |||||
Vicat softening temperature (5 kg load) ,℃ ≥ | ASTM D1525 | 105 | 105 | 110 | 115 |
Mechanical property | |||||
Tensile Strength , MPa, ≥ | ASTM D 638 | 50 | 52 | 52 | 54 |
Notched Izod impact trength, kJ/m2 | ASTM D 256 | 10 | 10 | 10 | 10 |
Above is just part of our grades, if you want to know further information or more grades, please contact info@sundow.com.
Table 2 the Selection Guide of CPVC Resin
Grade | Characteristics | Application |
IJ-550 | best flowability | it is mainly used for injection molding |
ET-750 | lower chlorine, its vicat softening temperature is lower than other grades; good processing ability and good surface | extrude of all kinds of heat-resistant plastic products, such as hot-water tube used in shipping and life facilities, brine tube, chlorine gas tube, electric pipeline of chlorine-alkali factories etc |
ET-800 | the general grade | extrude of all kinds of heat-resistant plastic products, such as hot-water tube used in shipping and life facilities, brine tube, chlorine gas tube, and electric pipeline of chlorine-alkali factories |
ET-850 | highest chlorine and highest vicat softening temperature | Extrude of all kinds of heat-resistant plastic products where the highest vicat softening temperature is required. |
Above is just part of our grades, if you want to know further information or more grades, please contact info@sundow.com.
Sprinkler Pipes Industrial Heat-Resistant Pipes Indoor hot water supply pipe Outdoor Air-Conditioner Duct Covers Hot Water Supply Joints Drainage Joints Power Cable Joints Cashing pipe for underground high-voltage power cable Transparent Fitting Heat-Resistant Industrial Plates and Sheets Transparent Heat-Resistant Industrial Plates Fittings Heat Resistant Flange High strength foaming material
Copyright © Sundow Polymers Co., Ltd.-Sundow is a reliable supplier in Plastic & Rubber field. Lu ICP Prepared 16037505 Disclaimers Site map | RSS | XML
+86-0536-8057068